Posts

7 Trees Absorb Toxins and Help Reduce Heat

/0 Comments/in /by

Tree absorbs toxins Indoor plants suitable for raising in the house As well as helping to absorb toxins, changing the waste air in the house to be clean and pure air as well.
How to cool off during the summer Not only have the fan turned on and air-conditioned There is one more way to cool the house easily: planting trees in the house itself. In addition to having to pay for expensive electricity bills Also keeping the air in the house clean Because the trees planted in these 7 trees help to absorb toxins. If you want to cool off without paying money Suggesting to find these trees to cool down.

1. Ficus tree

Ficus tree, pointed leaves Is one of the royal plants that are grown as sacred trees in some location. The appearance is a perennial plant, not deciduous, has roots, the air is broken by the trunk and hanging down to look beautiful. Helps absorb toxins in the air Increase oxygen And make the house cool Even though it is a tree that likes sunlight But can be planted in the shade without problems, easy care, like water medium.

2. Rubber tree

Indian rubber tree is a large perennial plant. Hnad and green leaves With latex on the inside Helps increase oxygen levels and removes toxins from various chemicals in the home as well, such as formaldehyde Should be planted in loamy soil Placed in a sunny place Do not like the sun or placed in the sun directly and do not need frequent watering.

3. The yellow tree

Palm family The trunk is a jointed, slender, suitable for planting in the living room. Because this type of tree helps change pollution such as carbon dioxide To become fresh air Helps maintain moisture levels to help cool the atmosphere around.

4. Fern

One of the most popular tree species that is grown in the house and is considered a great purifier. Because it can help maintain moisture and get rid of pollutants such as formaldehyde and various pollutants, keep the air in the house clean and pure Should be placed in a sunny place and planted in high humidity soil But can grow in the shade and dry soil as well.

5. Aloe Vera

A good herb that is often used to treat burns from heat exposure. In addition, if planted in the house also helps to cool off. And also found that aloe vera also helps to remove formaldehyde and clean air Grow well in the soil Well drained And keep watering the soil moist, but should not let the water get too wet.

6. Snake plant

Trees that are suitable for planting in the bedroom Because the dragonfly will spit oxygen and help reduce heat to cool the house all night. It also absorbs various toxins in the air, including formaldehyde, nitrogen oxides, trichlorethylene, xylene, toluene and benzene, plus easy care. Just place it in low light and don’t need frequent watering.

7. Pothos plant

Easy-to-grow ivy, easy to grow and grow like a heart-shaped leaf. Helps absorb a lot of toxins Whether it is formaldehyde, benzene, waxy and carbon monoxide Another advantage of this type of tree is that it is easy to feed, does not require frequent watering. Especially during cold weather or low temperature And placed in a place that was lightly lit.

This kind of hot weather, if trees are planted in some places It helps to release a lot of heat. It is also air-conditioned for clean, pure. Without toxic substances that are harmful to the body How to reduce the heat in the house that is both energy saving and can be used in many ways. Do not forget to try Windmee to know about house ventilation.

Top 5 Most Used Architect Programs

/0 Comments/in /by

Do you want to know what the architects currently use to create some home designs? We have collected popular programs, let’s see.

Autodesk AutoCAD

Autodesk AutoCAD is a computer-assisted design software (Computer Aided Drafting / Design, CAD) that can support both 2D and 3D operations. The development company is Autodesk. Even in the software market, there are many CAD programs. Engineering, architecture and various industries of organizations, both government and private organizations around the world, most commonly used AutoCAD because it is a software with high capabilities. The three-dimensional modeling. The designer can control the drawing. Change the view in all directions around Determine the characteristics of the drawing as needed. With commands and powerful help tools Helps save time and money, making AutoCAD a good choice in high resolution and precision applications.

Sketchup

Sketchup is a program created under the concept of combining advantages from prototyping. With a pencil to write down
Paper and using digital media to combine applications Effective It has an intelligent guidance system that uses the points, lines, surfaces to be used as a reference in modeling. Making the job creation like Smooth and fun It also has an easy-to-use interface.
The 3D model created in SketchUp looks like a surface model, forming a 3-dimensional surface, making it inside the hollow model. Unlike creating a 3D model, Solid is similar to clay molding, making it within a ton model. In addition, the curve characteristics in SketchUp are due to consist of The small straight line together, the rounded surface is the composition of the small flat surface together. The model is therefore not as smooth as creating a curve from a true curve, but good results. Is to make use of less resources File size is not large And fast processing

There are many programs for creating 3D applications. Different with features, usage, features and price from free to use properly.

Lumion

Lumion is a popular virtual scenery program. Because it is easy to use Fast and save time in work, can quickly render images, which will allow the designer to reduce work time and create beautiful works in a short time, able to support object models from external programs Various forms

Autodesk 3ds max

Autodesk 3Ds Max is a graphical computer program for Three-dimensional models and animations Works in the form of a three-dimensional principle, which has an x-axis, y-axis and Z-axis together,  able to create curve shape easily, able to create in realistic scenes and good at render.

Autodesk Revit

Autodesk Revit is software for Autodesk. Is a software to help design the building work, especially in the form of CAD, using the principle of building a building information simulation system or building a building information model (Building Information Modeling) instead of drawing. By using the Parametric Change Engine, which will be followed by the construction model, various composite items, landscape images and rough construction materials The form of usage will be three-dimensional.

This is a popular program used in architects. Also, we recommend a program that will help analyze the flow of wind in the house. To help design Can be applied to all of the above programs, that is Windmee. Windmee aims to develop simple automatic wind simulation from house, condo, room or any building floor plan image instead of creating a 3d model for building analysis, our process is based on image processing that recognizes and analyzes a image of building plan, then uses it to simulate airflow in realtime building simulation.

What is PM 2.5?

/0 Comments/in /by

PM 2.5 is a small dust of not more than 2.5 microns, compared to about 1 in 25 parts of the human hair diameter. So small that the human nose’s hair that acts as a dust filter cannot be filtered Therefore spread into the respiratory tract, bloodstream and into other ages in the body. The dust is transported by other substances such as cadmium, mercury, heavy metals and other carcinogens.

Causes of PM2.5

Dust of no more than 2.5 microns (PM2.5) comes from two large sources:

Direct sources include burning in the open air. Transportation, electricity generation, manufacturing industry
Combining other gases in the atmosphere, especially sulfur dioxide (SO2) and nitrogen oxides (NOx), as well as other toxic substances Which are harmful to the human body such as mercury (Hg), cadmium (Cd), arsenic (as) or polycyclic aromatic hydrocarbons (PAHs)

Severity level of PM 2.5

The World Health Organization (WHO) requires PM 2.5 dust to be placed in group 1 of carcinogens. Together with the World Bank report that Thailand has died from air pollution as much as 50,000, resulting in an economic system. Including the cost that the state has to lose in connection with the cost of medical treatment from this air pollution

Criteria of Air Quality Index

For people who do not know when air quality is becoming a health hazard Can check the Air Quality Index (AQI) at the Pollution Control Department website Thailand divides the air quality index into 5 levels from 0 to 201 using color as a comparison of the level of health effects.

AQIair qualitycolor that useswarning messages
0 – 25Very goodblueSuitable for outdoor and tourism activities.
26 – 50GoodgreenCan do outdoor activities and travel as usual.
51 – 100ModerateyellowCan do outdoor activities as usual. But if a person who needs special health care If there are respiratory symptoms And irritate the eyes Should not do long outdoor activities.
101 – 200starts to have an impact on health.orangeShould monitor health. If there are symptoms of respiratory irritation, eye irritation, should not do long outdoor activities. Or use protective equipment For those who need special health care Already have health symptoms such as coughing, dyspnea, eye inflammation, chest tightness, headache, irregular heart beat, nausea, weakness, should consult a doctor
201 or more, with red health effects, everyone should avoid all outdoor activities, avoid areas with high air pollution Or use self-protection equipment if necessary If there is a health condition, consult a doctor.
201 or morehealth effectsredEveryone should avoid all outdoor activities, avoid areas with high air pollution Or use self-protection equipment if necessary If there is a health condition, consult a doctor.

Prevention guidelines

Wear a dust mask. The mask that can prevent PM 2.5 dust is N95 masks, or can be used with a normal medical mask, but can be worn over 2 layers or stacked handkerchiefs or tissue inside as well.
Avoid all kinds of outdoor activities. If necessary, insert the N95 mask.
Use an air purifier Because the inside of the building may not always be safe from PM 2.5, especially the buildings that have closed doors often due to the large number of people entering Therefore, the air purifier is necessary to breathe in the building comfortably. Do not forget to try Windmee to know about house ventilation.

How to Get Rid of Bad Smell in the Room

/0 Comments/in /by

In fact, the smell of bad odors can occur in many factors. Both from what we brought into the room Especially various kinds of food Or will be the smell of cigarettes, bathroom odor, shoes, dangerous shoes Including refrigerator, microwave and musty smell according to various wardrobes Or the smell that arises with the humidity of the room

So we have the best solution. Follow the above steps. If doing item 1 is solve the problem, you got lucky. But if the room still has a bad smell Continue to do it. Articles 2, 3, 4 and 5-6. Let’s start!

1. Open the window door

Air ventilation is also the first thing we should do. To remove unwanted odors before level one How many doors are there? How many windows Open for you By allowing the outside air to replace Besides the weather Sunlight can help as well. Try to use Windmee to know about wind direction in your house.

2. Vinegar

Take the vinegar Put in a container and put it in a damp corner or smell like a closet, shoe cabinet, bathroom, etc. Believe it, just overnight, foul smell, musty smell, cigarette smell and unpleasant odor will disappear.

3. Guava leaves

Find a guava leaf and then grind or mix with a little water. To separate the residue of guava leaves With guava leaves Then bring guava juice into the container and place it in the room. 1 Return the fragrant oil from the guava leaf Will help eliminate the smell in our room

4. Pandan leaves

Bring pandan leaves to cut into pieces, about 1 inch long, put in a container, set aside in the middle of the room. To allow pandanus to absorb unpleasant odors And replaced with a mild aroma of pandan leaves

5. Baking powder

Not hard to find, baking powder, department stores supermarket Convenience store, buy out, not expensive. Pour in a cup in moderation. Then picked up and placed anywhere in the room Or will the corner be too bad

6. Air conditioner perfume

The bad smell disappeared, replaced by fragrant scents like air-conditioned fragrances. Before adding to the mixture throughout the room

Just this, the room will not stink anymore. Do not forget to try Windmee to know about house ventilation.

Roof Vent Reduce Heat by Natural Wind

/0 Comments/in /by

The simple principle of the air vent is that the hot air will float up. Flow out through the channel is designed And the cold outside air will flow in instead.

An important factor in building a residence is how to reduce heat in the house. Create a comfortable living for people living Because we have to live closely with the sun like being close friends Is it better to consume electricity and money in the bag? If we can solve the heat problem in this house in a way that conserves energy, saves electricity And save more money By creating a cooling path in the house using natural wind Through the vent.

Natural wind flow.

Creating a roof under the roof should be done from the stage of the house drawing. The main purpose of this detail is Create a channel to heat the heat accumulated under the roof and the hot air mass in the house that will rise naturally. Open the area under the roof to allow natural wind from outside to flow into the house to collect heat.

Should choose to position the ventilators should be placed at the top of the building Open to allow the wind-to-wind point to exit both sides easily In the direction of the wind blowing through Extending the roof to 1-1.5 meters for sunshine like Thailand Prevent the rain from splashing through the air in the house. Attached to the anti-insect grate, the birds come in and request to live.

The use of air vents can be used for both the normal roof and the 2-storey roof. If the air inlet is small The wind is large. The house will receive a lot of wind. And vice versa If the air inlet is large But the air inlet is small The wind that blows into the house will be less as well. Do not forget to try Windmee to know about house ventilation.

Guidelines for Choosing a House

/0 Comments/in /by

Preparation before creating a country outside the budget Very important in the top Is to choose a house style Because don’t forget that Investing in one house is a big deal. And believe that no one would want to waste money and additional time to improve or amend later So we will see that Guidelines for choosing a house to match Anyone can do it.

1. Calculate the size of the house: The first is to consider the size and number of rooms to fit the number of family members. How many rooms and bathrooms would you like to have in each room, as well as the kitchen, living room or balcony area? To know if the budget is enough or if not enough, can plan to increase or decrease the parts of the house correctly and pleasingly And more importantly, do not forget about the law regarding the shortening of the building as well.

2. Land suitability: a simple consideration But it has become a common mistake Choosing a house shape to fit the land is important. Because if the shape of the land is deep Should choose a deep house style Or if there is a wide land Wide house style selection Will look more perfect.

3. Weather and terrain: should choose a house that is suitable for the weather in each area. For example, if the weather is hot and humid Must choose a house that is quite airy Airy and convenient, and the sun can shine thoroughly. For example, if anyone is interested in building a beach house Should be a house made of cement or made with materials that are wind resistant And not using a house that has many floors or a mountain house may be a wooden house There is a balcony that extends out of the house, so anyone who is in the area must focus on this problem in choosing a home. Try to use Windmee to know about wind direction in your house.

4. Tastes and functionalities: Look at the house that matches the taste, such as modern, contemporary or European style, etc. So take time to consider what type is suitable for you and your family. Including thinking about the elements in the house that you choose The position of the room with the direction of the sun – how is the wind, or whether the house is open or not.

5. Lifestyle of residents: Try to anticipate how family members will live in the home, which areas of the house that are often used. The room should be larger than other rooms in the house.
Or the needs of each family will determine the number of rooms and factors of having an elderly person May cause you to think about creating a bedroom on the ground floor etc.

6. Environment: Neighbors or things that may affect the life in your home and family. Will be another issue that helps you choose whether Private areas, such as bedrooms, bathrooms or work rooms that need to concentrate, should be in the corner of the house that is not adjacent to the road area or dormitory with busy people.

7. Feng Shui: Feng Shui is a matter of personal belief. But considered Feng Shui is useful if studied well But if it is correct and confident, it must rely on the expert or fortune teller to help you get the right direction and correct according to Feng Shui principles.

It’s easy. Which will help to be a primary idea For readers to use in planning to build your new house Then you will get a dream home that is happy and comfortable for the whole family. Do not forget to try Windmee to know about house ventilation.

How to Wind Simulate My Floor Plan by Windmee

/0 Comments/in /by

Find your image

Do you want to know about ventilation in your residence? It is not a problem anymore because we have very useful tool for you that can be wind simulator from image. First of all you have to find your floor plan JPG image of your target such as condo or house floor plan. If you do not have any floor plan image please go to How to Create New Floor Plan Image by NBPlanner and come back to this page when you have created your floor plan image.

Example floor plan.

Adjust your image

If you haven’t downloaded our application yet, please download at homepage via Google Drive then unzip and start Windmee.exe. Windmee is supported only Windows 64-bit. If warning message “Windows Protected Your PC” appear please select “More info” then “Run anyway”.

How to download with Windmee by google Drive.

First image when you open Windmee.

Click the browse button at bottom-left to browse your image that you want to get wind simulation.

Browse button.

Sometimes windmee will minimize itself when you click the browse button then you have to click as below Windows taskbar and choose “Select an image” window (you must not choose Windmee window when browsing).

Windmee taskbar choose “Select an image” only.

Then browse your image that you want recommend jpg and png (but should not transparent png and Image dimension should not bigger than your screen resolution).

Browsing window.

As a result, you will get your image show on screen.

Your image show on screen.

Drag and drop your simulation area by mouse. As a result, you will see pink area of line detection.

Cropping simulation area.

Try to adjust detection value. If higher value, it will more detect line sensitively. If lower value, it will less detect line sensitively.

Detection value bar.

High detection value.

Medium detection value.

low detection value.

If your image is not towards “above is north“, then you have to navigate “N” direction at center-bottom towards your image north.

Before you navigate.

Your image north (Example).

After sync with your image.

If a building in your floor plan image is located at the same as your location, then you must press “MY LOCATION” button at right to get wind direction at your location.

Press “MY LOCATION” button at right to get wind direction at your location.

Then press correct button to start generate simulation. This process might take few minutes depend on image complexity.

Correct button.

Wind simulation your image

If the process has been finished. As a result, you will navigated to wind simulation screen.

Wind simulation screen.

You have to remove some of openning such as windows or doors because in your plan there is window lines existing. To remove wall you have to use mouse right click at openning area. To add wall you have to use mouse center click. Try to adjust image opacity you might want to see your original image as openning refference.

Before edit.

Remove wall by mouse right click.

Add wall by mouse center click.

Adjust image opacity to see original image.

That is all for get your lcoation’s wind direction simulation from image.

Free wind simulation by Windmee.

If you want to get wind direction at another location when simulating, try to visit Windmee PRO for extra feature.