Techniques to Help Keep the House Cool and Comfortable
The house is one of the four factors that cannot live without. But today, global warming has affected many people, both economically, socially, and as a whole. Makes people who think to grow a house or have a house already start to change a new concept That not only wants a beautiful, stable, strong house But must be a home to reduce global warming Energy saving That even if the fan is not turned on, the air conditioner feels natural cooling.
Many people would like to know that making the house cool naturally in a simple way Without having to rely on electrical power as the principle We have the information from the National Energy Policy Office to leave as follows.
Planting tall trees for sun protection By having a cool airflow blowing through the bushes at the right speed To reduce the outside temperature near the house and prevent the wind from passing through the house too much and should be planted in the direction of the sun.
Choose the type of tree to provide shade that is available locally such as the beginning of the year. To reduce fertilizer use Insecticides for treatment because these plants are accustomed to the terrain and landscape Domestic air.
Using landscape architecture To create an environment around The house is cool. By planting ground cover, planting grass, dressing the garden, creating a waterfall
Filling the soil around the house to high So that the floor and walls are partially lower than the soil Making it possible to bring coolness from the soil to use And planting shrubs around the house wall In the case of limited space, a dwarf or ivy can be planted along the balcony or fence to reduce the hot air blowing through the house. And reduce the strength of the sunlight that shines the building surface.
Making gutters from the roof Or parts In the home To prevent moisture from penetrating into the house Or may make a drainage pipe from washing to use for watering plants If you want to do parking Should be done with the roof in the direction of the sun To help reduce heat through the house directly.
Thermal insulation on the roof and walls The thickness of the insulation used depends on the cooling load. But most use insulation that is 2-3 inches thick. Insulators for roofs and walls have many types, such as glass fiber insulation, insulating pulp, ceramic insulators.
Paint the exterior walls of the house into light colors. Use oily and moisture-resistant materials Use light colored roof tiles to reflect heat well. For the wall that has a balcony, the door or window should be selected. Because it controls air volume better than using sliding doors or windows.
Install only the necessary glass windows. With enough to receive natural light And should avoid direct installation on the receiving sun.
Make awnings for glass windows With a horizontal awning suitable for the window in the sun during midday and afternoon The vertical awning is suitable for solar windows in the morning and evening.
Install curtains or blinds in the glass window area. To prevent heat from the sunlight entering the house As for the window film filter Even better to protect the heat from the sun but the cost is high. Located on the second floor above the parking area or balcony Should be sprayed or sprayed at the ceiling of the parking lot. Or the balcony To prevent the introduction of heat from the outside through the floor into the room.
Install roof ventilation fans To suck hot air under the roof outside.
Making a balcony with a canopy attached to the sun in the morning and evening. For use as a snack seat Or use to cook outside And also help reduce heat into the house as well.
Do not leak with cement or silicone. At the lamp installation Ceiling fan installation channels Channels that are prepared for water pipes, etc. to prevent heat from outside through the ceiling.
Do not leak the joints between the walls, doors and windows to prevent heat and moisture from entering the house in the case that the room is air-conditioned.
Properly placed cabinets and shelves, do not block the wind, do not obstruct ventilation and do not cover the desk light, facing the wall that receives natural light.
Keeping the carpet clean, the curtains, the sofa, not wet. To reduce the cooling load due to latent heat.
Organize the living room by considering energy saving. By arranging the room that was used in the morning in the direction of the sun The room that is used almost all day is in the direction of the wind. Because it is the most cool, such as the living room in the direction of the wind, etc.
Should install a washing machine, dryer in an area that is not air-conditioned and open, such as parking spaces, balconies outside the house. For cooling and reducing the moisture released from these electrical appliances If installed in a closed room, the ventilation fan should be installed to prevent heat buildup. And humidity in the room.
Choose to use high-performance electrical appliances and equipment. In addition to saving energy from itself Also reducing the heat released during use If taking into account and follow the above method Ensure that your home is cool and pleasant in every situation that the world is heating up.
Do not forget to try Windmee to know about house ventilation.